A Process Safety Management Company

Relief Systems

Relief Systems, Webinar

Relief Devices, DOT, and OSHA: Insight for Pressure Relief Systems Engineers [Webinar]

Is your facility under the OSHA PSM Standard or the DOT PHMSA regulations? Are you confused by fuzzy jurisdictional boundaries? Take this webinar.

In this 60-minute sponsored webinar, hear Provenance Consulting tackle an issue that causes confusion for many oil and gas industry professionals: The OSHA PSM Standard and the DOT PHMSA regulations and which apply to their relief devices. Join in to examine the unclear boundary between one jurisdiction and the other and how this is a source of consternation for pressure relief systems engineers.

What is the impact on your pressure relief systems design? Which requirements are the same across both agencies? Which are different? Tune in to gain insight and guidance.

Take a look at your agenda:

  • An overview of the DOT PHMSA and its regulations
  • What you need to know about OSHA and the PSM standard
  • Understanding jurisdictional boundaries and the contentious nature between OSHA and DOT
  • What’s similar and what’s different and the impact on your pressure relief systems design and related process engineering activities

Learn more about our Relief Systems Services

Presenter

Justin Phillips, P.E.

Justin Phillips has over eight years of onshore and offshore oil & gas process engineering and project execution experience. His technical experience includes process design with specialty in flare and relief systems.

Justin is the Relief Systems Line of Service Manager at Provenance Consulting, LLC. He holds a B.S. in Chemical Engineering from Texas A&M University in College Station, Texas and is a Licensed Professional Engineer in the State of Texas.

More Webinars

Mechanical Integrity, Resources, Webinar
How Damage Mechanism Reviews Impact Operations [Webinar]
Learn about Damage Mechanism Reviews (DMR) and how they can be used to more safely operate your units, reduce unit downtime & impact long-term planning like inspection frequency and turnaround...
Read more
PHA, Relief Systems, Webinar
What your Relief Experts Wish your PHA Team Knew
This webinar provides participants practical advice on how to get more out of the large investment in Relief Systems design for the benefit of their Process Hazard Analysis (PHA).
Read more
Relief Systems, Webinar

Everything You Wanted to Know About Relief Systems but Were Too Afraid to Ask

Have you ever had a “dumb” question about pressure relief systems that you were too afraid to ask? Have no fear. Get the answer here.

Provenance Consulting is ready to answer any question you have about pressure relief systems. Submit your most burning question anonymously in advance and get the answer during this interactive, 60-minute webinar. Designed for technicians, engineers, managers and other professionals, this three-part webinar is filed with straight-forward information to help you better understand basic, intermediate and complex pressure relief system problems and situations.

Don’t be shy. That question you’re too afraid to ask may be the exact same question others have. Join us.

Learn more about our Relief Systems Services

Presenter

Justin Phillips, P.E.

Justin Phillips has over eight years of onshore and offshore oil & gas process engineering and project execution experience. His technical experience includes process design with specialty in flare and relief systems.

Justin is the Relief Systems Line of Service Manager at Provenance Consulting, LLC. He holds a B.S. in Chemical Engineering from Texas A&M University in College Station, Texas and is a Licensed Professional Engineer in the State of Texas.

More Webinars

Mechanical Integrity, Resources, Webinar
How Damage Mechanism Reviews Impact Operations [Webinar]
Learn about Damage Mechanism Reviews (DMR) and how they can be used to more safely operate your units, reduce unit downtime & impact long-term planning like inspection frequency and turnaround...
Read more
PHA, Relief Systems, Webinar
What your Relief Experts Wish your PHA Team Knew
This webinar provides participants practical advice on how to get more out of the large investment in Relief Systems design for the benefit of their Process Hazard Analysis (PHA).
Read more
Relief Systems, Webinar

Avoid Pressure-Relief System Pitfalls by Justin Phillips, P.E.

Provenance is proud to announce that “Avoid Pressure-Relief Systems Pitfalls”, by Justin Phillips, P.E., has been recently published in the July issue of AIChE’s CEP Magazine. This accredited article focuses on mistakes that can be made when selecting, sizing and installing pressure relief systems. Mistakes that both new and experienced engineers can make when designing and auditing pressure relief systems.

 

Read and download the article here.

 

More about Justin Phillips, P.E.

Justin

Justin Phillips has over eight years of onshore and offshore oil & gas process engineering and project execution experience. His technical experience includes process design with specialty in flare and relief systems. Justin is the Relief Systems Line of Service Manager at Provenance Consulting, LLC. He holds a B.S. in Chemical Engineering from Texas A&M University in College Station, Texas and is a Licensed Professional Engineer in the State of Texas.

 

Relief Systems, Webinar

Whoops! I Made a Mistake Sizing My Relief Device and Then I Installed It Incorrectly!

 Mistakes – every engineer makes them. But mistakes made when selecting, sizing and installing pressure relief systems can create serious safety risk.

In this Provenance Consulting sponsored webinar, you’ll consider the risk created by mistakes both new and experienced engineers can make when designing and auditing pressure relief systems. Improper documentation is confusing and may put you at risk of citations as well as create rework. But improper installation or selection of the wrong relief valve can cause serious safety risk. In this webinar, you’ll learn to recognize and eliminate risk at the earliest opportunity. You’ll identify potential mistakes that can be made in overpressure identification and sizing. You’ll discuss common installation pitfalls and how to identify and address them. You’ll also learn how and when to question the necessity and appropriateness of pressure relief systems. By the end of the hour, you’ll be able to audit your own work as well as the work of others with greater proficiency

Take a look at your agenda:

  • How improper installation and selection of pressure relief systems impact your safety
  • How to recognize and address common sizing, selection and installation
  • Eliminating safety risk – the earlier, the better
  • Improving how you audit your work and the work of others

 

 

Link to Download the Presentation

 

Presenter(s):

Justin

Justin Phillips, P.E

Justin Phillips has over eight years of onshore and offshore oil & gas process engineering and project execution experience. His technical experience includes process design with specialty in flare and relief systems. Justin is the Relief Systems Line of Service Manager at Provenance Consulting, LLC. He holds a B.S. in Chemical Engineering from Texas A&M University in College Station, Texas and is a Licensed Professional Engineer in the State of Texas.